5-key functional or 17-key numerical and functional waterproof
keypad, with indication for quick access to main functions and
25mm LCD backlit display with 6 high contrast digits with icons
indicating the active functions.
Easy to clean ABS waterproof IP65 enclosure; resistant to harsh and
corrosive environments (IP40 on version with thermal printer).
Dimensions in mm: 278x125x186 mm
Suitable for use on the table, column, or wall.
The "...PXP..." versions are provided with attached thermal printer
and real time clock.
24-bit A/D converter, 4 channels, up to 200 conv./sec. and up to 8
signal linearisation points
Up to 10.000e or multirange 2 x 3000e @ 0,3 µV/d in CE-M approved
version for legal for trade use.
Up to 1.000.000 displayable divisions with internal resolution up
to 3.000.000 points
Digital calibration and set-up through keyboard or PC with
Built-in rechargeable battery (60 hours with one 350-Ohm load cell)
and 110-240 Vac internal power adapter
Connectable with up to 8 350-Ohm load cells or up to 16 700-Ohm
RS232/C port configurable for connection with printer/labeller, or
for attached printer.
RS232/C (or optionally RS485) bi-directional port configurable for
PC, PLC, remote display, and radio modem.
Quick RJ RS232 plug connection.
IR input only available for models with simplified 5-key keypad.
Zeroing, Automatic tare, Presettable tare, printing and/or data
transmission, selectable function command, on/off switching,
backlit setting, function mode quick selection, user menu.
17-key Version: Database of 30 tares, 2 Numeric IDs, keyboard lock,
repetition of last printout made, quick target insertion, APW,
threshold and setpoint.
Specific program (MSTSLV code) for use of the indicator as a
universal weight repeater or as a multi-scale repeater (MASTER) in
combination with DFW/DGT/MCW.
Multi-scale repeater (MASTER):
function which allows to repeat up to 32 independent scales, with
the possibility of managing their functions, or displaying and
printing the sum of the weighs of all the scales.
UNIVERSAL weight repeater:
function which allows to repeat the weight of any scales, through
the configuration of the input string.
SELECTABLE FUNCTION MODES
The user can select the operating modes directly using the
- High resolution display x 10
- Precision weighing with temporary recalibration via a sample
weight (for internal factory use)
- Lb to Kg converter
- Free conversion factor (for meter and litre counters etc.)
- Weight totalizer
- +/- controller with quick target and threshold input
- Percentage weighing
- Percentage batching with programmable target
- Piece counter
- Two-speed filling/batching with reset upon starting (with
The “alibi memory” and “setpoint” functions are available in
combination with the required operating mode and they are activated
automatically when installing the relevant optional board.
- PEAK, detection of weight peaks (code DFWPK)
- Newton to Kg converter (code DFWPK)
- Input-output (on request).
Access to the user menu is gained using the dedicated key* to
adjust the weighing filter, date and time, setpoint and tare
weight, which the user can access by entering a programmable access
* These quick access keys to the menus can be blocked by
configuring a dedicated password.
AVAILABLE FUNCTIONS FROM REMOTE CONTROL
Radiofrequency 6-key remote control: zero, tare, enable / disable
function, print, switch-off.
Infrared 19-key remote control: zero, tare / manual tare, enable /
disable function, print, switch-off (IR input only available for
models with simplified 5-key keypad).
Weight Indicators Controller MAIN CERTIFICATIONS
EU Type Examination Certificate (45501:2015)